MST2 Activator
Update like simple software update.
Supported versions: Almost any 2xx 6xx 8xx 9xxx
If you create addFecs.txt in the common folder then fecs will be added as FSC files (if missing).
Supported FEC’s with the Fec container patch – any defined in addFecs.txt
If you dont use the addFecs.txt then exection list will be used wich is good for all options except SportHMI.
Supported FEC’s with the EL patch – 00030000,00040100,00050000,00060100,00060200,00060300,00060800,00060900,00060b00,00070200,00070400,09400003 (Still ok for Navi)
If your unit does not have FEC’s at all but you want to be as close as possible like original then you can create two files in the common folder.
Filename VCRN and put VCRN as it is seen in 0x3C0A (15370). (there is VCRN.dummy just as example, you still need to rename it if you want to use it)
Filename VIN and put VIN in clear text in it. (there is VIN.dummy just as example, you still need to rename it if you want to use it)
You can see some examples in the common folder – VCRN.dummy and VIN.dummy files.
If the software of your unit is not supported then the activation process will create new files on the SD FW_VER_rev.tar.gz
Send that to me and i will add support, or update to supported version and reinstall the actication.
This activation also enables the option to automatically runs scripts from SD card.
To use that preare SD card with a file called delphi.sh on it. Remove any SD cards from the unit and insert the SD card with the script in slot 1 (SD1) or slot 2 (SD2) then restart the MMI.
On start up unit will wait for 10 seconds incase SD2 is used and execute the script.
As part of the installation the UART console input will also be enabled.