### [大众斯柯达奥迪倒车影像校准文件](https://www.vwodis.com/article/204.html)

**Published:** 2020-02-07T01:30:04

**Author:** ml3665666

**Excerpt:** 1.到广告店打印倒车影像校准布 a.用原厂设备ODIS 找到6C控制单元右键引导型功能选择校准 按提示输入距离…

1.到广告店打印倒车影像校准布

![](https://admin.vwodis.com/wp-content/uploads/2020/02/500_wKgH0FjbYJSAHl84AADxUVxtF7c445.jpg)

a.用原厂设备ODIS 找到6C控制单元右键引导型功能选择校准

![](https://admin.vwodis.com/wp-content/uploads/2020/02/500_wKgHz1jbVdKADzXeAAGwJlxt60E495.jpg)

按提示输入距离 

![](https://admin.vwodis.com/wp-content/uploads/2020/02/1.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/2.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/3.jpg)

测得垂直距离输入

![](https://admin.vwodis.com/wp-content/uploads/2020/02/4-1.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/5-1.jpg)

校准过程中 校准过程中MIB屏会切换几下

![](https://admin.vwodis.com/wp-content/uploads/2020/02/6.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/7.jpg)

无故障代码 完美安装

解析

默认轨迹模式

标尺分为格 经过测量

后杠距离第个橘色线条===40cm

后杠距离第二个绿色线条===60cm

后杠距离第个绿色线条===190cm

![](https://admin.vwodis.com/wp-content/uploads/2020/02/8.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/9.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/10.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/11.jpg)

![](https://admin.vwodis.com/wp-content/uploads/2020/02/12.jpg)

**Categories:** 一汽大众, 一汽奥迪, 上汽大众, 上汽斯柯达, 大众改装, 大众汽车

---